| |
|
 |
|
 |
press to see
detailed picture. |
|
| |
|
Technical Property |
Unit |
|
|
MACHINE
DIMENSIONS (length*height*width) |
mm |
2100*1440*600 |
|
WEIGHT |
kg |
900 |
|
ENGINE POWER |
kW |
15 |
|
ENGINE TYPE |
|
DC 20HP |
|
VOLTAGE |
V |
380 |
|
FREQUENCY |
Hz |
50/60 |
|
SPEED RANGE |
rpm |
0-4000 |
|
EXTERNAL DC SUPPLY 12V |
A |
6 |
|
EXTERNAL DC SUPPLY 24V |
A |
3 |
|
DISTANCE OF MOTOR CENTER |
mm |
125 |
|
OIL TANK CAPACITY |
L |
50 |
|
FEEDING PUMP |
L/min |
16 |
|
FEEDING MOTOR POWER |
KW |
0.75 |
|
LOW PRESSURE |
bar |
0-6 |
|
HIGH PRESSURE |
bar |
0-60 |
|
AIR PRESSURE |
bar |
0-2.5 |
|
VACUUM |
bar |
-1/0 |
|
TEMPERATURE REGULATING RANGE |
°C |
0-0.99 |
|
HEATER POWER |
kW |
2 |
|
TEST OIL COOLING SYSTEM |
|
Heat Exchanger |
|
COMPUTER SYSTEM |
|
P3 or P4 |
|
MONITORING UNIT |
|
15'' & 17'' LCD |
|
PRINTER |
|
Color, USB |
|
HARDWARE |
|
3.5 Flopy, CDROM Drive, 128MB Ram
(min),
10GB HD (min) |
|
OPTIONAL |
|
UPS |
|
| |
|
|
Control
Panel and Display System |
|
|
|
|
| |
|
 |
| |
| |
| |
|
Standard
Clamping Set |
|
|
|
 |
|
|
|
|
press to see
detailed picture. |
|
|
|
C-Max 20 CR-12/C Electronic Measuring
System
Diesel Pump Testing Bench
|
|
ELECTRONIC MEASURING SYSTEM
C-MAX 20 CR-12/C pump test bench are equipped the alectronic
measurement system that be carried out fast and sensitive test on
all pump types.The system measure space is 5-5000cm³/100 HUB,
system accuracy;average for 10 cm³/100 HUB ±1%.At the end of the
measure,enables to test with all syringes test oil measure and
average test oil measure.Adjustment for a accuracy of a pump with
one syringes measuring method of the test value is 1000 stroke,but
it make faster than in pipe at 100 stroke time.In this way the
user not wait,to foam be strain time in the pipe.
Measuring space speed=0-4000 rpm
12×5 – 500cm³ /1000 HUB
Measuring accuracy ~10cm³/1000 HUB ‹ ± 1%
|
|
|
|
GENERAL PROPERTIES
• The measurement console which carries the test tubes is able to
rotate 180 degrees around the test stand and the height can be
adjusted
• The control panel can rotate 180 degrees in both directions
• Electronic controlled heating system
• Gas cooling - ecowater (made in france)
• DC source which supplies 12v and 24v for the control of solenoid
valves
• Adjustable air pressure option for air feed pumps
• 50 liters fuel chamber for test fluid
• Ergonomic design
• Standard clamping set for both inline and rotary pump types
• 20 HP DC motor; electrical properties: 0-4000 rpm
• Electronic emergency brake system provides a safe stop of the
all system
• Electronic feedback system which keeps the speed constand in
various torque requirements
• Emergency stop buttons which stop all the systems in any
dangerous case
C-MAX 20 CR12/C test benches are designed to work fast , precise
and ergonomic.The DC motor is directly connected to the pump by a
mechanism.The system provides the power needed to test a large
variety of pumps.The motor ,which can drive inline and rotary pump
sets from 8-12 cylinders,can be adjusted from 0 to 4000 rpm with
±1 rpm precision.Electronic feedback system enables to test all
the pumps precisely with the constant speed system.The user
adjusts the speed, test oil temperature and stroke counter from
the buttons located on the control panel.The emergency buttons
which stop all the functions of the machine in case of danger are
located in both sides of the machine. |
|
|
|
OPERATION SYSTEM
In the machine , DC motor with closed loop speed control
system is used.By the usage of an encoder placed at the shaft
of the motor, the feedback mechanism keeps the motor speed in
a tolerance of one revolution/minute by controlling in every
half second.The user does the tests in optimum time by using
the pre-adjusted motor values saved in the computer system.In
the system , an electronic stop system is placed to enable the
motor stop from high speed values.That system also enables
saving from test period.All the mechanism connecting the pump
to the machine are free of balance, in an speed of the motor,
even very high , no vibration is formed on the machine. |
| |
|
CONTROL PANEL AND DISPLAY SYSTEM
The control system with computer adjusts all the machine
functions properly.Motor rotation speed,test oil temperature
and the stroke count can be displayed on the lcd screen.The
user adjusts all the test values easily by the electronic
control unit.The keybord is manufactured from chemical
resistant material. |
|
|
TEST FLUID HYDRAULIC SYSTEM
The test oil chamber is 50 liters capacity.The transfer pump
feeds 16 liters/ minute.The transfer pressure can be adjusted
by a regulator from 0 to 6 bar.The gauges on the machine can
show the pressure up to 4 bar and also vacuum pressure.For
adjusting the protrusion angles, high pressure up to 60 bar
feeding system is used.Integral hydraulic system enables to
reach all the need feed pressurevalues by one feed pump.The
test oil temperature can be read both in inlet and outlet with
±1 accuracy. |
|
|
AIR PRESSURE SYSTEM
Air pressure can be adjusted by a regulator placed on the
machine from 0 to 16 bar. |
|
|
DC POWER SYSTEM
For the control of the solenoids of some pumps, the machine
sources 12v and 24v voltages; the standard wires for
connection are served with the machine.Also, 220v supply
socket is placed on the machine. |
|
|
|
|
